Did you ever face the problem to calculate a particular

quantile of a large collection of numbers (about 1 million values) in a minimum amount of time? I came across this problem when adjusting an image processing system to use a better color assignment in false color images. These images were hampered by a few extreme values which caused an unwanted shift of the color scale.

So the idea to improve this situation was quite simple: change the color assignment from a min/max-based algorithm to a quantile-based algorithm, using the 0.01-quantile and the 0.99 quantile as the reference points for the color scale. This would allow for a maximum number of 1% of outliers on either side of the data distribution.

The only problem was that the calculation of the quantiles from a sorted list of values was too slow. Although the sorting was done by a fast sorting algorithm it took about 200 milli-seconds (ms) to obtain a quantile (the images contained about 800000 data points).

So I looked for a faster algorithm, and decided to implement the QuickSelect algorithm in Delphi. In order to get an idea about the speed improvement I performed a few measurements which are summarized in the table below. The calculation times for 0.01-, 0.5-, and 0.99-quantiles have been measured for various sizes of data sets (between 10000 and 5 million elements) and compared to the calculation time based on fully sorting the data sets (using CompSort, a modified bubble sort which is comparable in speed to the well-known quick sort algorithm). Further, the increase of time was measured when passing the data on the stack and not by reference (in order to prevent changing the data array):

Full 0.01 Qu.
0.01 Qu. 0.5 Qu. 0.99 Qu. Sort (Stack)
NData [ms] [ms] [ms] [ms] [ms]
-------------------------------------------------------
10000 0.12 0.20 0.14 1.78 0.16
20000 0.28 0.42 0.26 3.47 0.30
50000 0.65 1.03 0.64 10.5 0.77
100000 1.39 2.04 1.25 20.8 1.55
200000 2.51 4.08 2.57 43.0 3.01
500000 6.3 10.7 6.41 110 8.00
1000000 12.0 22.9 13.3 226 16.2
2000000 25.4 40.9 26.1 470 33.0
5000000 63.0 107.0 68.9 1167 82.0

So, all in all, the QuickSelect algorithm dramatically speeds up the calculation time, its properties can be summarized as follows:

- The QuickSelect algorithm is about a factor of 18.5(!) faster than the calculation based on sorting the data
- The calculation time scales linearly with the size of the data set
- The calculation time depends on the quantile: 0.01-quantiles and 0.99-quantiles are equally fast, 0.50-quantiles (= medians) take about 70% longer to calculate
- Changing the passing of the data array from call by reference to copying it on the stack increases calculation time by 30%. However, while this approach has the advantage of not changing the data array, it eventually may (and will) lead to a stack overflow when the size of the data set grows and cannot be restricted.

.... needless to say that the QuickSelect algorithm will become part of the next release of

MathPack (which is a package of the

SDL Component Suite). Following is the

Delphi code of the QuickSelect algorithm:

(********************************************************)
function QuickSelect (var data: array of double;
k, First, Last: integer): double;
(********************************************************
AUTHOR: Hans Lohninger (www.lohninger.com)
ENTRY: data .......... data array
k ............. k-th order statistic
First, Last ... range of data to be processed
EXIT: function returns the value of the k-th smallest
element of the data array
REMARK: you are allowed to use this code for free in your
own programs provided that do not change the
reference to the author (including the Web URL)
********************************************************)
function Partition (First, Last, ixPiv: integer): integer;
{--------------------------------------------------------}
var
i : integer;
iy : integer;
pivot : double;
adouble: double;
begin
pivot := data[ixPiv];
data[ixPiv] := data[First];
data[First] := pivot;
iy := First + 1;
while (iy < Last) and (data[iy] < pivot) do
inc (iy);
for i:=iy+1 to Last do
if (data[i] <= pivot) then
begin
adouble := data[i];
data[i] := data[iy];
data[iy] := adouble;
inc(iy);
end;
result := iy - 1;
data[First] := data[result];
data[result] := pivot;
result := result;
end;
var
stop : boolean;
ixSplit: integer;
ixPiv : integer;
begin
stop := false;
while not stop do
begin
ixPiv := (First+Last) div 2;
ixSplit := partition(First, Last, ixPiv);
if k < ixSplit
then Last := ixSplit
else
if k > ixSplit
then First := ixSplit + 1
else begin
stop := true;
result := data[k];
end;
end;
end;